Bailey has a full 3-1/2" of combined brick and fiber board insulation. We add the extra insulation to the outside of the brick without sacrificing valuable stacking space. This combo-profile is not only a better insulator than 3” brick, it insures you get the extra insulation without reducing the size of your kiln chamber.

Did you know that manufacturers using 3” brick to add insulation to their walls actually reduce the interior diameter by 1 inch! That means you loose about 8% of your stacking space! It also makes it more difficult to lower shelves into position since you have less room for your fingers.

Our kilns are designed to consume the least amount of energy so you get inexpensive firings, extended element life, and less wear on the electronics and the frame. We all need to think about using less energy to protect the environment.

Our Lid Counter Weight makes lifting a heavy lid effortless. Bailey 7 and 10 cu. ft. kilns use a spring counter weight system. Our oval lids use an actual counter weight with pulley and cable to balance the weight of the lid.

There isn’t a better technical staff than Bailey to ask questions. When you talk to Bailey, your talking to 31 years of experience.

STANDARD FEATURES
The 2327-10 is equipped with a 3-Zone Controller and back-up Kiln Sitter. This is the safest way to build an electric kiln: Controller with Kiln Sitter back-up. Other standard features include: 3 1/2" double insulated walls, heavy-duty elements, floor element, 3 Sectional Walls with Lock Down Design, sheet metal under the base, spring assisted easy lift lid, lid latch, easy-access hinged control panel, easy-view controller read-out and individual zone LED's. Kilns are shipped with a power cord, but no plug. Direct wiring to a “disconnect” box is required. CSA approved.