1-800-431-6067

Click Here for Newsletter Archives
Sign up for Our Bi- Monthly Newsletter with Specials

Enter Email Address:
 

For Email Newsletters you can trust

Small Tools - MKM Stamps for Clay

Rick McKinney Porcelain plate with brushwork - 10" square by 2-1/2" tall; Stamped stoneware jar - 13" tall;
Stamped stoneware platter -
3" tall x 15" square.

  • All stamps are 7.0 cm long

  • All stamps have two different designs, one at each end.

  • All stamps are made of a fine-grained hard wood

  • All treated with oil for durability.

  • All stamps are beveled at each end.

In addition to the individual images, many of the stamps are designed to be used together as pattern blocks or design builders that build different patterns when they are rotated, reversed, or used in combination with other stamps to create large patterns.  Some sample patterns are shown below.

Small Square Series - Sample Patterns

Small Square Stamps

Item No. Stamp Dimensions Design at "A" End Design at "B" End Price Purchase
C-094-SSS-1 1.5 cm x 1.5 cm List: $3.95
Bailey: $3.55 
C-094-SSS-2 1.5 cm x 1.5 cm List: $3.95
Bailey: $3.55 
C-094-SSS-3 1.5 cm x 1.5 cm List: $3.95
Bailey: $3.55 
C-094-SSS-4 1.5 cm x 1.5 cm List: $3.95
Bailey: $3.55 
C-094-SSS-6 1.5 cm x 1.5 cm List: $3.95
Bailey: $3.55 
C-094-SSS-7 1.5 cm x 1.5 cm List: $3.95
Bailey: $3.55 
C-094-SSS-8 1.5 cm x 1.5 cm List: $3.95
Bailey: $3.55 
C-094-SSS-10 1.5 cm x 1.5 cm List: $3.95
Bailey: $3.55 
C-094-SSS-11 1.5 cm x 1.5 cm List: $3.95
Bailey: $3.55 
C-094-SSS-13 1.5 cm x 1.5 cm List: $3.95
Bailey: $3.55 

Medium Square Stamps

Item No. Stamp Dimensions Design at "A" End Design at "B" End Price Purchase
C-094-SSM-2 3.0 cm x 3.0 cm List: $7.95
Bailey: $7.15 
C-094-SSM-5 3.0 cm x 3.0 cm List: $7.95
Bailey: $7.15 
C-094-SSM-10 3.0 cm x 3.0 cm List: $7.95
Bailey: $7.15 
Small Triangle Series - Sample Patterns

Small Triangle Stamps

Item No. Stamp Dimensions Design at "A" End Design at "B" End Price Purchase
C-094-STS-1 1.5 cm x 1.5 cm List: $3.95
Bailey: $3.55

Medium Triangle Stamps

Item No. Stamp Dimensions Design at "A" End Design at "B" End Price Purchase
C-094-STM-3 3.0 cm x 3.0 cm List: $6.95
Bailey: $6.25 
C-094-STM-6 3.0 cm x 3.0 cm List: $6.95
Bailey: $6.25 
C-094-STM-7 3.0 cm x 3.0 cm List: $6.95
Bailey: $6.25 

Small Right Triangle Stamps

Item No. Stamp Dimensions Design at "A" End Design at "B" End Price Purchase
C-094-STS-R1 1.5 cm x 1.5 cm List: $3.95
Bailey: $3.55
C-094-STS-R2 1.5 cm x 1.5 cm List: $3.95
Bailey: $3.55
C-094-STS-R3 1.5 cm x 1.5 cm List: $3.95
Bailey: $3.55
C-094-STS-R4 1.5 cm x 1.5 cm List: $3.95
Bailey: $3.55

Medium Right Triangle Stamps

Item No. Stamp Dimensions Design at "A" End Design at "B" End Price Purchase
C-094-STM-R1 3.0 cm x 3.0 cm List: $7.95
Bailey: $7.15
C-094-STM-R2 3.0 cm x 3.0 cm List: $7.95
Bailey: $7.15
C-094-STM-R3 3.0 cm x 3.0 cm List: $6.95
Bailey: $6.25
C-094-STM-R4 3.0 cm x 3.0 cm List: $6.95
Bailey: $6.25

Small Rectangle Stamps

Item No. Stamp Dimensions Design at "A" End Design at "B" End Price Purchase
C-094-SRS-3 1.5 cm x 3.0 cm List: $5.95
Bailey: $5.36

Medium Rectangle Triangle Stamps

Item No. Stamp Dimensions Design at "A" End Design at "B" End Price Purchase
C-094-SRM-6 3.0 cm x 6.0 cm List: $9.95
Bailey: $8.95
C-094-SRM-8 3.0 cm x 6.0 cm List: $9.95
Bailey: $8.95
C-094-SRM-9 3.0 cm x 6.0 cm List: $9.95
Bailey: $8.95
C-094-SRM-10 3.0 cm x 6.0 cm List: $9.95
Bailey: $8.95
Chinese Character Stamps

Chinese Character Small Square Stamp - Good Fortune/Happiness

Item No. Stamp Dimensions Price Purchase
C-094-SSS-62 1.5 cm x 1.5 cm List: $3.95
Bailey: $3.55

Chinese Character Medium Square Stamp - Good Fortune/Happiness

Item No. Stamp Dimensions Price Purchase
C-094-SSM-62 3.0 cm x 3.0 cm List: $7.95
Bailey: $7.15
 

Chinese Character Small Square Stamp - Harmony/Long Life

Item No. Stamp Dimensions Price Purchase
C-094-SSS-65 1.5 cm x 1.5 cm List: $3.95
Bailey: $3.55

Chinese Character Medium Square Stamp - Harmony/Long Life

Item No. Stamp Dimensions Price Purchase
C-094-SSM-65 3.0 cm x 3.0 cm List: $7.95
Bailey: $7.15
 

Chinese Character Small Square Stamp - Beautiful/Family

Item No. Stamp Dimensions Price Purchase
C-094-SSS-69 1.5 cm x 1.5 cm List: $3.95
Bailey: $3.55

Chinese Character Medium Square Stamp - Beautiful/Family

Item No. Stamp Dimensions Price Purchase
C-094-SSM-69 3.0 cm x 3.0 cm List: $7.95
Bailey: $7.15
 
MKM Paddles

MKM Glaze Mixing Paddle
This paddle can be used for hand building but it also makes an excellent paddle for stirring glazes. Fits a 5-Gal bucket perfectly with a handle long enough to stick out of the pail. It gets into the corners, really moves the glaze, never clogs up, and rinses off with a quick dip into the wash bucket. The wood is soaked in hot mineral oil to make it durable. smooth on both sides.
Measures 17-1/4” L x 3-1/8” W.

MKM Glaze Mixing Paddle

Item No. Description Price Purchase
C-094-GP MKM Glaze Mixing Paddle $6.95
   

C-094-LP1

C-094-LP2

Large Paddles
Excellent textured paddles for shaping and decorating thrown pots or rolling patterned coils for handles, etc. Each has 2 distinct textures and measures 13” L x 4-1/4” W. The wood is soaked in hot mineral oil to make it durable. Front and back views are shown.

MKM Large Textured Paddles

Item No. Description Price Purchase
C-094-LP1 Large Textured Paddle #1 $12.95
C-094-LP2 Large Textured Paddle #2 $12.95
   

C-094-SP1

C-094-SP2

 

Small Paddles
Smaller scale textured paddles for shaping and decorating thrown pots or rolling patterned coils for handles, etc. With 2 distinct textures like the Large Paddles, each measures 7-7/8” L x 4-1/2” W. The wood is soaked in hot mineral oil to make it durable. Front and back views are shown.

MKM Small Textured Paddles

Item No. Description Price Purchase
C-094-SP1 Small Textured Paddle #1 $10.95
C-094-SP2 Small Textured Paddle #2 $10.95
MKM Decorating Disks

C-094-DDSM


C-094-DDLG

It's the holes! Hundred of small holes at the intersection of the concentric circles and radial lines allow the user to mark right through the disk. The holes are large enough for either a pin tool, pencil, or pen tip to fit through.

MKM Small Decorating Disks
The MKM Decorating Disks also come in a small size, each disk measuring only 4 inches in diameter - perfect for use with small items, with feet, and for placing inside bowls and plates for decorating purposes.

MKM Large Decorating Disks
The large MKM Decorating Disks come as a set of two 16 x 16 inch (40.5 cm x 40.5 cm) transparent Mylar disks. Each disk has a series of concentric circles divided by colored radial lines. At the intersection of the circles and radial lines are small holes that allow the user to mark right through the disk.

MKM Decorating Disks

Item No. Description Price Purchase
C-094-DDSM MKM Decorating Disk - Small $18.95
C-094-DDLG MKM Decorating Disk - Large $29.95
MKM Coco Ribs

MKM CocoRibs are made from coconut shells. CocoRibs are tough and their ergonomic shape and natural curves make them very suitable for both throwing and hand building. The ribs have been soaked in mineral oil. Natural variation: Some of the CocoRibs are made from younger coconuts, in which case the shell will be lighter in color and somewhat thinner, and some are made from older coconuts, in which case the shell will be darker and somewhat thicker. The size of the coconut may also vary, resulting in ribs that have sharper or less sharp curves. And because the meat of the coconut is removed, in many cases by hand with a knife, the interior of the CocoRib may be marked or scratched. All these represent the natural variation of the material used to make these ribs, and should not affect the performance of the rib in any way.

Coco Rib Set
7 CocoRibs available as a bagged set. The smallest rib is approximately 2 inches long, and the largest is 5 or 6 inches across the long dimension.

How to take care of your MKM CocoRibs: If the edge comes rough (and many do), or becomes rough during use, a few strokes with a piece of sand paper (80 grit is fine) will smooth it up quickly.

Coco Rib Set

Item No. Description Price Purchase
C-094-CCRS Coco Rib Set $16.95
Tips for using your CocoRibs

CocoRibs were intended for hand building -- for pushing out walls and scraping and smoothing curved surfaces. The idea for developing a series of ribs made from coconuts came from reading an article about Magdalene Odundo. And they do work incredibly well for hand building. However, when I tried them out for throwing, I found that they worked equally well with this technique. Their natural curves made them easy to hold and easy to use. The edge was hard, but could easily be sanded smooth, and coconut shells are naturally durable in water. If you wish to remove throwing lines, then use a CocoRib on the exterior. I do a lot of brushwork on my pottery, so I am in the habit of smoothing the exterior of some of my pottery.

CocoRib # C3 being used on the interior of a small bowl. One way to make a bowl:

1) Bring the wall of the bowl up in an outward flowing curve similar to the bowl in the previous picture.
2) Bring the wall to the desired height of the bowl, and the rim out to the desire, or almost desired, width of the bowl.
3) (Optional) Use a curved rib or CocoRib to smooth the exterior of the bowl, and to remove the slip.
4) Use a rib to push out the wall of the bowl, and to stretch the wall of the bowl into its final configuration. This allows the rib to set a beautiful surface on the interior of the bowl.
5) Alter as necessary. Or not.

MKM Throwing Tools

These tools come in 5 configurations and sizes. The tools come with the rib(s) pictured. N0TE: The ribs at the end of the tools should be tightened before using so that they do not rotate while in use.

The Double Ended Throwing Tool
This tool comes in three sizes:

Double Ended Throwing Tool

Item No. Description Price Purchase
C-094-TTSM MKM Double Ended Throwing Tool - Small (6.5 inches overall) $18.95
C-094-TTMED MKM Double Ended Throwing Tool - Medium (13.5 inches overall) $24.95
C-094-TTLG MKM Double Ended Throwing Tool - Large (19.5 inches overall) $29.95

The Tall Jar Tool
Great for tall jars, glasses, narrow vases, or just reaching down into a form and doing the final adjustments to the shape. Length of handle is 12 inches (30cm).

The Tall Jar Tool

Item No. Description Price Purchase
C-094-TJT The Tall Jar Tool $16.95

The Shoulder Tool
This tool can snicker through small openings to do the final shaping and lifting of a shoulder. It is useful even when the opening at the top is not small, but where reaching in and under would be awkward. Length of the handle is 7 3/4 inches (19.7 cm)

The Shoulder Tool

Item No. Description Price Purchase
C-094-ST The Shoulder Tool $16.95

Important notes about using MKM Ultimate Throwing Sticks

1. The rib head needs to be screwed down tightly to the handle so that the rib does not rotate while in use. I originally thought a loose rib that changed position in accordance to the configuration of the clay wall would work well. But it doesn't. The rib flops around and is hard to control. It is much easier to secure the rib firmly to the handle.

2. Hold the handle with the left hand, and tilt the rib slightly so that the rib is trailing along the surface of the clay.

3. Use an expired credit card, old hotel door key card, or Sherril Mud Tool flexible rib on the outside. Of course, you can also use your fingers, but I have to say that I find it easier to keep the clay under control when it gets thin when I use a flexible rib on the outside and a rigid rib on the inside.

The ribs on the MKM Ultimate Throwing Sticks are removable. They are attached using two washers, and then a machine screw that screws into a tapered metal insert. The insert is screwed into the wood handle from the opposite side so that it can't be pulled through the handle. This means that the ribs can easily be replaced with a rib of a different shape, either one made by MKM, or one made or adjusted in shape by you. If the hole in the rib is too large, simply use a larger fender washer (a large washer with a small screw hole - available at most hardware stores.)

This shape of rib is found at one end of all the double-ended throwing sticks. I have found this shape very useful for pushing out the walls of medium and large sized pots. The rib has no sharp corners, fits into relatively small openings at the top, and has a nice gentle curve that allows it to smoothly move the wall out.

The MKM Shoulder Tool is excellent for adjusting the angle and break of the shoulder of a pot. On a narrow mouthed bottle or jar form where it is no longer possible to insert your hand or finger, you can use the shoulder tool to form and support the shoulder. It will fit through a very narrow opening. 
If the shoulder begins to collapse, use a hair dryer or heat gun to dry out the clay in the shoulder area, and then use the MKM Shoulder Tool to reshape the shoulder, and to lift the break between the shoulder and the main wall of the form. Although this is a relatively small tool, it is amazing how useful it can be on large forms as well. The tool extends out 7 inches (17.5 cm), and it is a rare pot that has a shoulder wider than 14 inches in diameter.
The MKM Tall Jar Tool can be used to push out or adjust the contour of the belly of a pot. Because it is a straight tool, it is less useful in the shoulder area of the pot.

This shape of rib is found at the other end of all the double-ended throwing sticks. This shape is particularly useful for adjusting and lifting the shoulder of a pot, and for moving up the height of the should break (where the shoulder starts moving sharply downward to form the body or belly of the pot).

A thinner version of this rib is used with the MKM Shoulder Tool.

The MKM Tall Jar Tool is extremely versatile. It is designed to be used with tall and relatively narrow forms. However, it has proven very useful when making minor adjustments to the profile of almost any form when it is awkward to reach in with your hand. The bottom of the rib is flattened slightly so that the tool and rib and be used to form the bottom and wall of a cup.
Using the body end of T3c to begin moving the wall of the form out. If the clay wall is dried a bit during this process, either with a heat gun or blow torch, then the wall can be extended out quite a bit. Despite the use of the hands for advertising purposes, I actually prefer to use a credit card, or flexible rib such as a Trim Gin rib or Sherril Mud Tool.
Using the shoulder rib end of T3c to adjust the shoulder of a pot.

TOP | MASTER INDEX

 

© 2012 Bailey Pottery Equipment Corporation