LAYOUT & REQUIREMENTS FOR THE KILN ROOM
Bailey Kilns can be installed inside the studio, school or in a separate out-building. All kilns must be sheltered from wind and moisture. We do not recommend a sole roof structure without total enclosure on the sides. This type of minimal coverage is not sufficient to prevent wind from either altering the performance of the kiln or potently blowing out the burners. If minimal side protection is employed, then careful consideration of wind shields must be added. We will consult as to the best strategy. However, a total enclosure (with fresh air access) remains the best way to provide a “non-turbulent” static environment that is optimum for obtaining consistent reliable results. A 120 volt, 15 amp outlet is required.