The Original DRD Series Manual Slab RollersIntroduced in 1978, Bailey's Original DRD Series is the finest slab roller built anywhere. The Original DRD slab rollers are commercial duty machines designed for professionals who want maximum load output, exacting accuracy, and trouble-free operation. Clay is rolled in one pass to the desired thickness. No other roller even comes close to this robust versatile design.The Original DRD Series comes in two sizes: 30" and 40" wide. Each machine has two 4" diameter steel rollers mounted in heavy duty ball bearings. The 40" rollers have been gear reduced for easy manual operation. The 34" dia round handle provides ample leverage when rolling slabs. The rollers are coated with an industrial epoxy... Read More
The Original DRD Series Manual Slab Rollers Introduced in 1978, Bailey's Original DRD Series is the finest slab roller built anywhere. The Original DRD slab rollers are commercial duty machines designed for professionals who want maximum load output, exacting accuracy, and trouble-free operation. Clay is rolled in one pass to the desired thickness. No other roller even comes close to this robust versatile design.
The Original DRD Series comes in two sizes: 30" and 40" wide. Each machine has two 4" diameter steel rollers mounted in heavy duty ball bearings. The 40" rollers have been gear reduced for easy manual operation. The 34" dia round handle provides ample leverage when rolling slabs. The rollers are coated with an industrial epoxy abrasive to provide a positive non-slip traction. Slab thickness can be infinitely adjusted from 1/16" to 1- 3/4" using one adjustment knob for perfectly even slabs. A height scale provides quick reference and exact measurements.
The 7Ft Long Table has both a feed counter and a 5 Ft work area for processing your slabs.
Both the Long and Short Tables are 34" H and feature heavy duty steel frames and durable melamine counters.
Please note: Melamine surfaces should not be saturated with water. Do not leave wet clay directly on the bare table surface for extended periods of time. If the counter becomes wet, dry it with a towel. Do not cut directly on the melamine surface or damage may occur.
Assembly is required.
Original DRD Series machines and tables ship via truck only. Call for a freight estimate and lead time: 1-800-431-6067.
34" Round Handle - The large 34" Diameter Round Handle provides ample leverage for easy rolling.
Massive 4" Diameter Rollers - Our largest rollers handle the most clay and provide maximum compression during slab formation.
Simultaneous Height Adjustment - Top roller adjusts from one side only. Rollers always remain parallel for consistently even slabs.
Steel Gear Reduction - Bailey uses only steel gears in their heavy-duty slab rollers for strength and durability. Gear reduced for extra easy operation.
One-Pass Slab Rolling - Bailey's unique Bi-Level Table features a lower feed counter that increases the surface contact between the bottom roller and the clay canvas for better grip and compression. This combined with the massive 4" rollers allows you to roll up to 3" of soft wedgeable clay into a slab in one pass.
This large 40" W x 7 Ft. Long Table has a full 60" L exit counter to the right side of the machine to work on the finished slab. The 18" L feed counter on the left is short because wedgeable clay can be stacked up to 3 in. high to be fed into the machine, depending on the desired finished slab thickness. The counter height is 34". The DRD Long Table ships via truck and assembly is required.
