The Original DRD Series Electric Slab Rollers The Original DRD slab rollers are commercial duty machines designed for professionals who want maximum load output, exacting accuracy, and trouble-free operation. Clay is rolled in one pass to the desired thickness. No other roller even comes close to this robust versatile design. The Bailey Electric DRD is an asset for the high production artist who requires a large number of slabs daily. A remote control Pusher Bar protects your hands as you advance the clay into the rollers. The electric motor rolls slabs effortlessly- perfect for production applications.The Original DRD Series Electric Slab Roller comes in two sizes: 30" and 40" wide. Each machine has two steel rollers mounted in heavy... Read More
The Original DRD Series Electric Slab Rollers The Original DRD slab rollers are commercial duty machines designed for professionals who want maximum load output, exacting accuracy, and trouble-free operation. Clay is rolled in one pass to the desired thickness. No other roller even comes close to this robust versatile design. The Bailey Electric DRD is an asset for the high production artist who requires a large number of slabs daily. A remote control Pusher Bar protects your hands as you advance the clay into the rollers. The electric motor rolls slabs effortlessly- perfect for production applications.
The Original DRD Series Electric Slab Roller comes in two sizes: 30" and 40" wide. Each machine has two steel rollers mounted in heavy duty ball bearings. The rollers are driven by a #40 chain and sprocket to insure maximum strength under heavy loads. Both machines utilize massive 4" rollers that have been gear reduced.The rollers are coated with an industrial epoxy abrasive to provide a positive non-slip traction. The electric motor is operated by a safety remote control Pusher Bar.Slab thickness can be infinitely adjusted from 1/16" - 1-3/4" using one adjustment knob for perfectly even slabs. A height scale provides quick reference and consistency.
This machine's 30"W x 30"L Short Table has an 18" Long feed counter but only a 7" exit counter and no work area. It has castors on one end for mobility and is designed to roll up to an existing work table so that slabs can be rolled through the machine and fed out onto the work table surface. This design is perfect for studios without enough space to add another large table. The counter height is 34" and made of melamine with a heavy-duty steel frame. Please note: melamine surfaces should not be saturated with water. Do not leave wet clay directly on the bare table surface for extended periods of time. If the counter becomes wet, dry it with a towel. Do not cut directly on the melamine surface or damage may occur.
Assembly is required.
Original DRD Series Electric machines and tables ship by truck only. Call for a freight estimate and lead time: 800-431-6067.
Safety Pusher Bar - Keeps hands safely away from the rollers while operating the machine. Dual push buttons control the motor while the pusher bar advances clay into the rollers.
Massive 4" Diameter Rollers - Our largest rollers handle the most clay and provide maximum compression during slab formation.
Simultaneous Height Adjustment - Top roller adjusts from one side only. Rollers always remain parallel for consistently even slabs.
Chain and Sprocket Drive - Rollers are driven by a #40 chain and sprocket for maximum strength under heavy loads.
One-Pass Slab Rolling - Bailey's unique Bi-Level Table features a lower feed counter that increases the surface contact between the bottom roller and the clay canvas for better grip and compression. This, combined with the massive 4" rollers, allows you to roll up to 3" of soft wedgeable clay into a slab in one pass.