Laguna Pro-V Spray Booth

The Laguna Pro-V Spray Booth is a professional quality large spray booth designed with recycling glaze in mind. This basic outfit (C-072-14) includes the polyethylene booth, leg set and filter bracket only. The fan, filters and shelf must be purchased separately: see bundles below.

The polyethylene surface is non corrosive and easy to clean because it repels water. The bottom of the unit is hopper shaped to collect overspray run off. (The Stainless Steel Shelf (C-172-15) is required to provide a flat surface to place items on inside the booth: see Bundles below to purchase.) A drain is located in the bottom of the hopper for convenient glaze removal- just place a bucket under the drain and reclaim your glaze.

2 types of filters are available and one type or the other must be purchased separately to complete your booth: see separate Bundles below to compare and purchase.

The Fan/Motor is also required to complete your booth: see Bundles below to purchase.

This is a large free-standing booth. The work area opening is 42" wide by 34" deep and 39" high. The overall size of the polyethylene booth is 48-1/4" wide x 56" high x 50-1/4" deep (which includes exhaust motor mount in back). With the stainless steel legs, the overall height is 74.25". Due to its large size, a doorway in excess of 48" wide is necessary in order to install this booth.

As with all Spray Booths, venting to the outside is required. The vent duct must be 12" diameter and is not supplied with the booth. All ductwork and installation is the purchaser's responsibility.

The Pro-V Spray Booth ships via freight: call 800-431-6067 for a rate.