|
Bailey Baltic Birch bats feature 13 layers of
marine grade hardwoods laminated together. This wood will not delaminate
and will remain dimensionally stable with regular use.
|
Bailey Wood Bats
Bailey now offers Baltic Birch Wood Bats. Featuring the absorbency of
plaster, the durability of plastic and a price to beat them both. These
heavy-duty bats measure 3/4 thick for maximum strength and moisture
draw with no flex even in the largest diameters. They come drilled for bat
pins 10 on center to fit most standard wheelheads. Click here
for more details.
|
Bailey
Wood Bats |
|
Part
No. |
Description
* |
Ship
Wt. |
Price |
Purchase |
| C-406-12 |
12
in. Baltic Bat |
2
lbs. |
$9.25 |
|
| C-406-14 |
14
in. Baltic Bat |
3
lbs. |
$12.35 |
|
| C-406-16 |
16
in. Baltic Bat |
4
lbs. |
$18.60 |
|
| C-406-18 |
18
in. Baltic Bat |
5
lbs. |
$24.00 |
|
| C-406-20 |
19.5
in. Baltic Bat |
6
lbs. |
$32.00 |
|
| C-406-23 |
23
in. Baltic Bat |
12
lbs. |
$42.80 |
|
| C-406-29 |
29.5
in. Baltic Bat |
30
lbs. |
$44.60 |
|
| (*Each
bat measures 1/4 less than its listed diameter) |
|
|
NEW!
9"
Square Plasti-Bat (drilled) Increases shelf storage space and
fits all standard wheel heads with pre-drilled holes that are 10" on
center.
|
Plastic Bats
Plastic bats are easily the most durable choice for throwing bats. They do
not wear out due to heavy use, making them popular with schools and group
studios. Plastic bats do not absorb water and therefore wont swell or
de-laminate and the pin-holes remain true. It is, however, necessary to
cut pieces free with a wire shortly after throwing as moisture will not be
absorbed from the clay where it contacts the bat. If left too long, pieces
will warp or crack due to uneven drying.
|
|
Plasti-Bat (Brent)
Made of solid plastic textured on one side to prevent clay from
sliding during centering. Holes are drilled 10 on center, one hole
slightly larger to accommodate variations in bat pin positions. Also
available undrilled.
|
Plasti-Bat
(Brent) |
|
Part
No. |
Description |
Ship
Wt. |
List
Price |
Bailey
Price |
Purchase |
| C-114-15 |
NEW!
9 in. Square - drilled |
1/2
lb. |
$9.39 |
$9.39 |
|
| C-114-12 |
8
in. Bat - undrilled |
|
$8.49 |
$8.49 |
|
| C-114-10 |
8
in. Bat - drilled |
|
$9.49 |
$9.49 |
|
| C-114-11 |
10
in. Bat, drilled |
|
$10.95 |
$10.95 |
|
| C-114-1 |
12
in. Bat, undrilled |
1½
lbs. |
$12.95 |
$10.10 |
|
| C-114-2 |
12
in.Bat, drilled |
1½
lbs. |
$13.95 |
$11.02 |
|
| C-114-3 |
14
in. Bat, undrilled |
2
lbs. |
$15.95 |
$12.28 |
|
| C-114-4 |
14
in. Bat, drilled |
2
lbs. |
$16.95 |
$13.22 |
|
| C-114-8 |
16
in. Bat - drilled |
|
$27.95 |
$22.36 |
|
| C-114-5 |
18
in. Bat, undrilled |
3
lbs. |
$34.95 |
$27.26 |
|
| C-114-6 |
18
in. Bat, drilled |
3
lbs. |
$36.95 |
$28.45 |
|
| C-114-7 |
20
in. Bat, drilled |
4½
lbs. |
$42.95 |
$34.36 |
|
| C-122-16 |
Brent
Bat Pins (set of 2) |
|
$2.00 |
$2.00 |
|
|
|
| *Brown bats
currently still in stock. After they have sold out, brown will be
discontinued and only colorful will be available. |
|
C.I. Bats (Creative
Industries)
Made of injection-molded plastic with both 9" and 10" pin holes
recessed in a grid-like understructure leaving no holes in the surface of
the bat. There is a recessed ledge around the perimeter to get your
fingers underneath for easy removal. The top surface is roughened to
prevent clay from sliding during centering. Available in both traditional
round as well as a space-saving 7 square that still fits both 9" and 10" bat pins but requires much less space on studio shelves.
|
C.I. Bats
(Creative Industries) |
|
Part
No. |
Description |
Ship
Wt. |
List
Price |
Bailey
Price |
Purchase |
| C-117-7 |
7
in. Square Bat |
1/2
lb. |
$4.50 |
$3.92 |
|
| C-117-8 |
12
in. Round Bat |
1
lbs. |
$6.50 |
$5.72 |
|
| C-117-9-B |
14
in.
Round Brown Bat |
2
lbs. |
$7.50 |
$5.94 |
|
| C-117-9 |
14
in. Round Bat |
2
lbs. |
$7.50 |
$6.60 |
|
| C-117-15 |
C.I.
Bat Pins (set of 2) |
|
$4.50 |
$4.50 |
|
|
|
|
Grinding Disks
An easy, economical way to smooth the bottoms of your pots
using a machine you already have - your wheel! 12 diameter Silicon
Carbide discs with a peel-off adhesive backing. Affix to any 12 bat and
attach to your wheelhead. All grinding is done using the fastest wheel
speed: a mask should be worn when grinding. Available in 50-grit
to remove material fastest (including small glaze drips) and 80-grit
for a smooth finish. The discs can be used with or without water on the
grinding surface.
|
Grinding Disks |
|
Part
No. |
Description |
List
Price |
Bailey
Price |
Purchase |
| C-117-13 |
50
Grit Grinding Disc (Coarse) |
$8.95 |
$8.95 |
|
| C-117-14 |
80
Grit Grinding Disc (Fine) |
$8.95 |
$8.95 |
|
|
|
Adapt-A-Bat 14"
The Adapt-A-Bat allows the use of
8" and 10" bats on larger wheel heads which are not drilled to
accept smaller size bats. Made of 1/4" thick rigid plastic, it wont
swell or shrink, easy to clean, and waterproof.
|
Adapt-A-Bat
14" |
|
Part
No. |
Description
* |
List
Price |
Our
Price |
Purchase |
| C-114-14 |
Adapt-A-Bat
14" |
$29.00 |
$29.00 |
|
|
|
|
Bats for the Shimpo
Aspire
2 styles made specially to
fit the Aspires 10 diameter
wheelhead. One is plastic with concentric rings
and insets for bat pins (top left). The other is their new Wonder
Bat made of heavy 1/2 thick masonite with inset rubber grommets
to fit securely over the bat pins (bottom left).
|
Shimpo Aspire
Bats |
|
Part
No. |
Description |
List
Price |
Bailey
Price |
Purchase |
| C-116-28-B |
10
Plastic Bat |
$7.00 |
$6.30 |
|
| C-116-29 |
10
Wonder Bat
(Masonite) |
$7.50 |
$7.50 |
|
|
|
Plaster
Bats
Plaster is the traditional material for throwing bats. Pieces can be
left on plaster bats until they self-release because plaster continues to
absorb moisture from the clay longer than even masonite or pressed wood.
Shipping plaster bats has always been prohibitive due to weight, cost and
damages, until now.... Make your own flat or customized plaster bats at
home with the Quick Release Mold System: all the benefits of plaster bats
without the shipping cost and trouble!
Click Here for Details!
|
|
Masonite & Pressed Wood
Bats
These types of bats are made of dense, press-board type materials. Not as
durable as plastic, they are semi-absorbent and should not be submerged
in or saturated with water as they will warp and de-laminate. The benefits
of this absorbent quality are: (1) clay adheres better to the surface
during centering; (2) moisture will be absorbed from the clay during the
early stages of drying; pieces can be left to stiffen longer before
cutting free with a wire.
|
|
Duron Bats (Pacifica)
Made of sturdy 1/4" Masonite with pin holes drilled 10 on center
(one slightly larger to accommodate pin variations). Duron Bats are
available in 12, 13 and 15 diameters.
|
Duron
Bats (Pacifica) |
|
Part
No. |
Description |
Ship
Wt. |
List
Price |
Bailey
Price |
Purchase |
Qty.
1-11
each |
Qty.
12+
each |
| C-124-14 |
12
in. Duron Bat |
1
lb. |
$5.20 |
$4.70 |
$4.40 |
|
| C-124-09 |
13
in. Duron Bat |
1
lb. |
$5.50 |
$5.15 |
$4.65 |
|
| C-124-10 |
15
in. Duron Bat |
2
lbs |
$6.05 |
$5.45 |
$5.15 |
|
| C-124-11 |
Pacifica
Bat Pins (set of 2) |
|
|
$2.50
(set of 2) |
|
|
|
|
NEW!
WonderBat
WonderBats perform similar to
plaster in that there is no need to wire off. WonderBats are made
from1/2" thick material and thus resists warping and are very
durable. All bats are drilled for standard 3/8" diameter pins on
10" centers and now have reinforced grommets in the pin hole.
|
WonderBat |
|
Part
No. |
Description |
Bailey
Price |
Purchase |
| C-116-32 |
12"
WonderBat |
$10.25 |
|
| C-116-34 |
14"
WonderBat |
$11.50 |
|
| C-116-36 |
WonderBat
Adapter with (6) 6" square inserts |
$30.75 |
|
| C-116-37 |
Set
of (6) 6" Square
Inserts (only) |
$15.75 |
|
|
|
|
10
times stronger than pottery plaster bats!
The Hydro-Bat is made of Hydro-Stone, a USG
product containing cement and crystalline silica, that is 8 to 10 times
stronger then pottery plaster. The surface is scratch resistant yet
absorbs water like plaster eliminating the need to cut your pieces off the
bat with a wire.
The Hydro-Bat was designed to fit on wheel heads
that have bat pins spaced 10 apart on center.
The hard rubber grommets cast into the underside of each Hydro-Bat will
not swell or change shape and are sized to fit over a 3/8 diameter bat
pin head. (If your bat pins are not 3/8 you will need to purchase new
ones.)
( a)
Due to their small diameter, the grommets under the 8.5 and 10
Hydro-Bats are spaced 6 apart and require the
HBA Adapter
to convert standard 10
inch pins to 6 inches. This adapter is made of sturdy polyethelene plastic
and fits snuggly over the 10 bat pins on your wheel head. It has two
upfacing 3/8 diameter bat pins fused in at 6 apart. The 8.5 &
10 Hydro-Bats fit onto these pins. Similarly, the
6 Mini Hydro-Bat has grommets spaced 4 apart
and requires the
HB6A
Adapter to
convert the standard 10 pins to 4. (If desired, these adapters can
be used as templates to permanently drill 4 or 6 holes into your
wheelhead.)
|
|
|
Hydro-Bat
Cross-sectional View with Hard Rubber Grommet and Bat Pin Detail |
| |
|
Hydro-Bats |
|
Item No. |
Diameter / (thickness) |
Price |
Purchase
|
|
C-131-HB28 |
28" / (1-1/2) |
$75.00 |
|
|
C-131-HB24 |
24" /
(1-1/2) |
$59.95 |
|
|
C-131-HB20 |
20" /
(1-1/4) |
$46.95 |
|
|
C-131-HB18 |
18" /
(1-1/4) |
$29.95 |
|
|
C-131-HB16 |
16" /
(3/4 ) |
$19.99 |
|
|
C-131-HB14 |
14" /
(3/4 ) |
$17.99 |
|
|
C-131-HB12 |
12.5" /
(3/4 ) |
$15.99 |
|
|
C-131-HB10 |
10" /
(3/4 )
(Requires HBA
Adapter) |
$11.99 |
|
|
C-131-HB8 |
8.5" /
(3/4 )
(Requires HBA
Adapter) |
$9.99 |
|
|
C-131-HBA |
HBA Adapter
10"- 6"
(for 8.5 & 10 Hydro-Bats) |
$28.00 |
|
|
C-131-HB6 |
6" Mini Hydro-Bat /(3/4
)
(Requires HB6A
Adapter) |
$7.49 |
|
|
C-131-HB6A |
HB6A
Adaptor 10" - 4"
(for 6 Mini Hydro-Bat) |
$28.00 |
|
|
Some
sizes may be dropped shipped to reduce UPS costs.
|
|
|
|
New Hump Mold Forms!
Now available in four
different profiles and a variety of sizes.
Designed for throwing or slab working, the
Hydro-Bat Hump Molds are also made of Hydro-Stone for strength, durability
and water absorbency. They feature the same rubber grommets as the
standard Hydro-Bats cast underneath for an easy and snug fit on the
potter's wheel. All Hydro-Bat Hump Molds fit over 3/8 diameter bat pins
spaced 10 on center except for the 8 & 9 Plate Hump Molds:
these require the HBA
Adapter to convert the 10 pins to 6 as explained in the
Hydro-Bat information above (a).
|
Hydro-Bat Hump Molds |
|
Item No. |
Size/Description |
Price |
Purchase
|
|
Plates |
|
C-131-HBHM15P |
15" Plate Hump Mold |
$39.99 |
|
|
C-131-HBHM14P |
14" Plate Hump Mold |
$31.99 |
|
|
C-131-HBHM12P |
12.5" Plate Hump Mold |
$29.99 |
|
|
C-131-HBHM11P |
11.5" Plate Hump Mold |
$27.99 |
|
|
C-131-HBHM9P |
9" Plate Hump Mold
(Requires HBA
Adapter) |
$21.99 |
|
|
C-131-HBHM8P |
8" Plate Hump Mold
(Requires HBA
Adapter) |
$19.99 |
|
|
C-131-HBA |
HBA Adapter
10"- 6"
(for 9 & 8 Plate Hump Molds) |
$28.00 |
|
|
Charger
Plates |
|
C-131-HBHM12C |
12" Charger Plate Hump Mold |
$29.99 |
|
|
C-131-HBHM14C |
14" Charger Plate Hump Mold |
$34.99 |
|
|
C-131-HBHM15C |
15" Charger Plate Hump Mold |
$39.99 |
|
|
Platters |
|
C-131-HBHM15PL |
15" Platter Hump Mold |
$39.99 |
|
|
C-131-HBHM17PL |
17" Platter Hump Mold |
$49.99 |
|
|
Bowls |
|
C-131-HBHMB |
Bowl Hump Mold
12.5" W X 6" H |
$42.99 |
|
|
C-131-HBHMB12 |
Bowl Hump Mold
12.5" W X 4" H |
$35.99 |
|
|
C-131-HBHMB16 |
Bowl Hump Mold
16" W X 4" H |
$52.99 |
|
|
Some
sizes may be dropped shipped to reduce UPS costs.
|
|
|
Quick-Release Mold-Making System
| Bailey Wheel Accessories
TOP
| MASTER INDEX
|
