|
Model 9100
Model 9150
|
Damp Work Cabinets
Designed to keep your “works in progress” in moist workable
condition. These cabinets are constructed of 19 gauge welded steel with 16
gauge supports and are “air-sealed” by foam rubber gasketed doors. All
exterior walls and doors are double-walled and lined with an internal
layer of anodized sheet aluminum for long life. Shelves are constructed of
aluminum, supported by a welded steel angle frame with center brace. Each
shelf holds a 11/8” thick highly absorbent, bonded foam bat. Two models
are available:
C-143-1
Model 9100
Full-size Damp Cabinet (4 Shelves)
Dim: 36” W x 18” D x 84” H
Shipping Weight: 275 lbs.
List: $1816.00
Price: $1634.00
C-143-5
Model 9150
Base-Type Damp Cabinet (2 Shelves)
Dim: 36” W x 18” D x 31” H
Shipping Weight: 125 lbs.
List: $984.00
Price: $886.00
|
|
Model 9200
Model 9250
|
Drying Cabinets
Designed to store and protect clay projects during the drying
period. Each unit is constructed of 13 gauge angles welded to ¾” 16
gauge “expanded steel mesh,” providing full air circulation throughout
the cabinet. The top and bottom pans are fully welded 16 gauge steel
reinforced for extra heavy-duty service. Shelves are constructed with
sheets of 1/8” perforated hardboard supported by a welded steel angle
frame and an additional cross-brace in the middle. Two models are
available:
C-143-2
Model 9200
Full-Size Drying Cabinet (4 Shelves)
Dim: 36” W x 18” D x 84” H
Shipping Weight: 200 lbs.
List: $1414.00
Price: $1273.00
C-143-4
Model 9250
Base-Type Drying Cabinet (2 Shelves)
Dim: 36” W x 18” D x 31” H
Shipping Weight: 85 lbs.
List: $942.00
Price: $848.00
|
|
Model 9615
Model 9625
|
Wedging Boards
480 square inches of wedging area. This heavy-duty steel frame
measures 20” x 24” x 2½” deep and when filled with plaster forms a
sturdy, absorbent wedging surface. It also features a fine, high-strength
steel cutting wire and “snap-on” canvas wedging cloth. Plaster is not
included. Available as an economical “table-top” version (frame only)
-or- with a sturdy steel stand:
C-143-7
Model 9615
Wedging “Table-Top” Only
Dim: 24” W x 20” D x 2½” H
Shipping Weight: 25 lbs.
List: $174.00
Price: $156.00
C-143-14
Model 9625
Wedging Table With Stand
Dim: Top: 24” W x 20” D x 2½” H
Stand: 20” W x 19” D x 30” to 36” H (Adjustable)
Shipping Weight: 50 lbs.
List: $422.00
Price: $379.00
C-143-15
Stand (only)
List: $248.00
Price: $223.00
|
|
Space-Saving
Combinations
Smart combination units that serve multiple purposes when
studio space is limited.
Model 9300
|
Damp/Dry Cabinet
Both a Damp Work Cabinet and a Drying Cabinet with all the
advantages and features of the models listed above. In addition, a
heavy-duty, 1-1/4” moisture resistant Formica top provides a durable
work surface that can be used as a group instruction center or student
work stations. A compact design for maximum utilization of Space.
C-143-3
Model 9300
Damp/Dry Work Cabinet
Dim: 72” W x 24” D x 32-1/4” H
Shipping Weight: 270 lbs.
List:
$2096.00
Price: $1886.00
|
|
Model 9420
|
Wedging Table/Storage
Cabinet
This space saver combines the Model #9615 Wedging Table Top
described above with a heavy-duty steel cabinet. It features a removable
plastic clay storage bin with lid that holds approximately 140 lbs. A
front tilt-out bin opening provides easy access to the clay. Plaster not
included.
C-143-6
Model 9420
Wedging Table/Storage Cabinet
Dim: Top: 24” W x 20” D x 2-1/2” H
Cabinet: 20” W x 16” D x 30” H
Shipping Weights: 17/45 lbs.
List: $593.00
Price: $533.00
|
|
TOP
| MASTER INDEX
|
