Studio
Equipment - Slip
Production Equipment
|
(photo
pending)
|
Optional
Mixer
Can be added to either T60 or T100 table converting it to its own
reclaimer. Consists of a ˝ h.p. motor, shaft, mixing blade and
mounting bracket, it clamps to any two dowels. It may be left in
place permanently or moved from unit to unit. Weight: 25 lbs.
C-125-020
Price: $288.00
|
|
|
Model T60
Model T100
|
High-Quality
Casting
Tables
The Model T60 and T100 continue to be the highest quality casting
tables in the industry today. Each unit features a 50 gallon tank
and heavy duty steel frame capable of supporting 2 tons. The pumps
have no bearings or seals exposed to the slips and are belt driven
by an externally mounted ˝ h.p. motor. The unique flow-through
design provides gentle agitation that begins in the bottom and stirs
throughout the tank, conditioning your slip while you cast. A one
piece fiberglass tank is covered across the top with sturdy 1”
dowels built in sections for easy removal and cleaning.
- No bearings or seals exposed to
the slip
- 9 ft. reinforced hose with 1”
utility nozzle
- Removable pouring racks with 1”
natural birch dowels: 2
sections on T60; 3 sections on T100
- ˝ h.p. motor, 110 volt, 8 ft.
power cord
- Conveniently located on-off switch
- 50 gallon tank capacity (both
models)
- Steel frame with 2 ton load
capacity
|
|
High
Quality Casting
Tables |
|
Item
No. |
Description |
Ship Wt. |
Price |
Purchase |
| C-125-018 |
Model T60, 30” W x 64” L
x 31” H
|
160 lbs.
|
$1373.00
|
|
| C-125-019 |
Model T100, 30” W x 96” L
x 31” H
|
210 lbs.
|
$1481.00
|
|
|
F.O.B. Kentland, IN 47951
|
|
|
|
|
Power
Sponge
An indispensable tool for all production potters! The
Power Sponge is a fantastic new dual-purpose finishing
machine and a must for anyone producing large volumes of
slip-caste greenware or dry-footed glaze ware. |
Greenware
Finishing
Seam removal and surface smoothing are the most time-consuming and
dust producing processes involved in making slip caste ceramics. The
traditional method of scraping, sanding and sponging each piece by
hand is very slow, produces large quantities of dust and requires
excessive handling of the greenware in its most fragile state. The Power
Sponge quickly removes seam lines, softens sharp edges and
smoothes surface imperfections while continually rinsing and
wringing itself in the bucket below. Excess clay is absorbed into
the sponge and immediately washed out in the water bucket producing no
scrapings or dust! In addition, each piece is handled less,
significantly reducing the chances for breakage. You won’t believe
how fast and easy greenware finishing can be!
Each Power Sponge is shipped
with one 5-Gal. pail. The mechanism removes quickly for easy
cleaning. Replacement sponges are available. |
C-112-3
Price: $569.00
|
Glaze
Cleaning
Production glazing techniques like dipping and spraying allow you to
cover large volumes of bisqueware quickly and easily. However, if
your work needs to be “dry-footed” (as most mid- and high-fire
work does), then you must either 1) apply wax resist to the bottom
of each piece before glazing -or- 2) clean off excess glaze by hand
after glazing. Both processes are time consuming and require extra
handling of the bisque pieces increasing the chance for breakage.
The Power Sponge removes glaze from tile bottoms, foot rings,
slab bases and any other surface that will touch the kiln shelf
during firing. The firm, durable sponge rinses and wrings itself
continuously as it cleans bisqueware faster than you ever imagined
and eliminates the need for resist application or hand cleaning. An
incredible time-saver!
The Power Sponge ships via UPS. Ship
Wt. 20 lbs. |
|
|
Slip
Mixers
TOP
| MASTER INDEX
|
|
