Bailey
Kilns - Studio ST-8 Swing Door
Gas Kiln
|
Studio ST-8 Swing Door Gas Kiln
(Shown with optional Combustion hood and
Burner Port Hoods)
|
Super
Economical... Beautiful Firing Results!
Many potters make the mistake of purchasing a “cheap” kiln and live to
regret it. As the saying goes, “you get what you pay for.” Do you want
to chance firing your pottery in a kiln that is under built and isn’t
capable of firing efficiently or evenly? And what a shock it is when you
realize that the manufacturer doesn’t have the know how to resolve your
firing problems. The Bailey ST-8-SW was engineered to offer an entry level
kiln that provides perfect balance of combustion, insulation, and
performance at an unprecedented low price. The Bailey ST-8-SW is energy
efficient, easy to use and deliver perfectly even heat and atmospheres.
And you get the assurance of Bailey quality and innovation, plus unlimited
access to our kiln technical staff. Bailey Studio kilns ensure that your
work will fire properly every time. What makes the Bailey ST-8-SW so
economical is a difference in the frame design and the burner design. The
“SW” stands for swinging door. Because the chamber is relatively small
(8 cu. ft. stacking space), you do not need power burners. So we have
installed high efficiency venturi burners along with our standard safety
equipment, gauges and pilots. There is no need for electrical supply on
this model.
Click Here for Gas Kiln Introduction
|
|
|
Venturi Burners and
Safety Equipment
Our system of using venturi burners on a small kiln
provides dependable firing results and excellent flame projection. Air and
gas are mixed thoroughly in the venturi tube providing complete combustion
of the fuel, and reduced firing costs. You’ll appreciate the cones
bending together top to bottom! Each of the two burners comes equipped
with a water column pressure gauge, 100% flame safety gas valve (AGA
approved component), and a pilot burner.
|
|
Downdraft Design
The Bailey ST-8-SW offers an unbeatable combination of
natural draft combustion and downdraft design. Even heat and reductions
can be achieved throughout the entire firing with the Bailey
downdrafts 360 degree circulation pattern.
Frame Construction
The structural frame components consist of heavy duty angle
iron with an average thickness of 3/16” with solid panel sheet metal
side walls.
Click Here for
Frame & Insulation Features
Insulation
The Bailey ST-8-SW is insulated with a
variety of high quality IFB refractory, strategically placed for maximum
efficiency. Wall, Floor, and Ceiling thicknesses are 4-1/2 throughout. This
ingenious refractory profile provides a kiln that will high fire with
incredible energy efficiency, and yet, provide an optimal cool down ramp
that will allow for fast cycling. All bricks in the main body of the
kiln have been “dry stacked” to prevent all the disadvantages of
mortared wall construction. Virtually any area of the kiln can be repaired
or replaced with a minimum of effort.
|
|
How to Purchase Front
Loading Gas Kilns
NOTICE: Because
we feel that purchasing a kiln and options is an important decision for
your business or school and we can offer much insight and advice to the
process, we do not allow our kilns to be ordered on-line. We would prefer
that you call our advisor staff and be assured the best engineered system
for your specific application. There are many options available to customize your purchase.
Click
Here for Venting | Click
Here for Receiving & Installation
| Studio
ST-8 Swing Door Gas Kiln Specifications |
| Code |
Model |
Stack
Space (cu. Ft.) |
Inside
Dimen. WxDxH" |
Total
Inside Volume |
Outside
Dimen. WxDxH" |
Stacking
Area WxDxH" |
Wall,
Arch Brick |
BTU'S,
CU FT. per HR |
Weight |
Approx.
Gas Inlet |
|
M-404-006 |
Studio
ST-8-SW |
8 |
27 x 22.5 x 38.5 h |
13 |
42.5 x 55 x 63 h |
20 x 20 x 33 |
4 ½" |
95,000 86 CFH |
1300 |
N=1" LP=3/8" |
Specifications subject to change without
notice. Consult with a Bailey representative before installing gas lines,
building a kiln site, or any other preparatory stages in installing a
kiln.
M-404-006
Studio ST-8-SW Gas Kiln
(Ship. Wt. 1100 lbs.)
List Price: $4000.00
Shelf Kit: $314.00
Crating: $150.00
| Cone
10 High Alumina Fast Fire Furniture Kits |
|
High Alumina
Furniture Kits |
Studio ST-8-DS |
|
Shelf Sizes & Quantities |
(10) 10 x 20 |
|
Post Assortments |
(6) ea. of: 2,4,5,6,8 |
|
|
Optional
Accessories
|
- 2nd Stage
Regulator
- Spare Burner
Thermocouple
- Oxygen Probe
Installed
- Digital High
Limit Controller
- Spare
Pyrometer Thermocouples
|
- 8” ID
Combustion Hood
- Furniture
Kits
- Pyrometers
- Venting
Materials
- Safety UV
Glasses
|
|
|
Click
Here for Studio Standard Kilns
Click
Here for Bailey Front
Loading Deluxe and Pro Kilns
Click Here for Bailey Deluxe and Pro Shuttle
Kilns
Click Here for Oxygen Probe, Pyrometers, & Kiln Accessories
TOP
| MASTER INDEX
|
|
